VarPol Female connector 1-row Part No. 961-60nn6-17
![VarPol FL Foto](https://www.eptusa.com/data/media/97/VarPol_FL_Foto-28802.jpg)
Illustration similar
Parallel
Perpendicular
Press-fit
![VarPol FL Anschlusslaenge 17 Zeichnung](https://www.eptusa.com/data/media/97/VarPol_FL-Anschlusslaenge-17_Zeichnung-15652.png)
- Performance Level 2
- Press-fit
- termination length 17 mm
- 2 - 36 contacts (nn in part number = pins / row)
- 1-row
Technical Specifications
Basics
Performance Level | 2 |
---|---|
No. of Contacts | 2 - 36 |
Termination Technology | Press-fit |
Termination Length | 17 mm |
Board-to-Board Distance | 19.35 mm - 23.35 mm |
Operating Temperature Range | -55°C to +125°C |
Material
Insulator Material | PBT glass filled, UL 94 V-0 |
---|---|
Contact Material | Copper alloy |
Mechanical
Pitch | 2.54 mm |
---|---|
Mating Force per Pin | max. 0.9 N |
Separating Force per Pin | min 0.6 N |
Electrical
Operational Current | max. 1.9 A |
---|---|
Operational Voltage | 150 V |
Contact Resistance | < 20 mΩ |
Clearance and Creepage | 1.2 mm |
Insulation Resistance | >106 MΩ |
Approval / Compliance
UL file | E130314 |
---|---|
Environment | RoHS compliant |
Hole Specifications
![lochspezifikationen bemassungen](https://www.eptusa.com/data/media/78/lochspezifikationen-bemassungen-9351.png)
Material | imm. Sn printed circuit boards |
---|---|
Nominal Hole | Ø 1.0 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 1.0 +0.09 / -0.06 mm |
C Drill Hole | 1.15 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | imm. Sn plating, max. 1.5 µm |
F Annular Ring | min. 0.1 mm |
Material | Ni, Au printed circuit boards |
---|---|
Nominal Hole | Ø 1.0 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 1.0 +0.09 / -0.06 mm |
C Drill Hole | 1.15 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | Ni, Au plating, 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni |
F Annular Ring | min. 0.1 mm |
Material | pure Cu printed circuit boards |
---|---|
Nominal Hole | Ø 1.0 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 1.0 +0.09 / -0.06 mm |
C Drill Hole | 1.15 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | OSP, z.B. GLICOAT-SMD (F2) with 0.12 - 0.15 µm |
F Annular Ring | min. 0.1 mm |
Material | HAL Sn printed circuit boards |
---|---|
Nominal Hole | Ø 1.0 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 1.0 +0.09 / -0.06 mm |
C Drill Hole | 1.15 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | HAL Sn, 5 - 15 µm |
F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5