Compact and robust PCB connections in SMT
With One27 connectors from ept, PCB spacing ranging from 8.00 to 20.00 mm can be achieved.
Features
- 12 to 80 contacts, 1
- 4 A current-carrying capacity,
- 500 mating cycles,
- maximum contact reliability,
- tested compatibility with other manufacturers,
- IDC header strips available individually or
- pre-assembled with cable, packaged in tape & reel,
- LV214 tested
Applications
- Board-to-board (mezzanine) from 8 mm to 20.00 mm
- Parallel and right-angle connections
- IDC connection with ribbon cable
One27: Overview
Filter
Straight Female
Straight spring strip
One27 Mid-Profile Connector Part No. 414-53032-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53012-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53016-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53020-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53026-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53040-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53050-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53068-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53080-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52012-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52016-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52020-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52026-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52032-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52040-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52050-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52068-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52080-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54012-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54016-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54020-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54026-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54032-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54040-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54050-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54068-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54080-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
Straight blade bar
One27 Mid-Profile Knife Strip Part No. 413-53012-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53016-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53020-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53026-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53032-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53040-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53050-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53068-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53080-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52012-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52016-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52020-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52026-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52032-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52040-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52050-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52068-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52080-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54012-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54016-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54020-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54026-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54032-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54040-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54050-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54068-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54080-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
Messerleiste gerade
Straight Male
Angled spring strip
One27 Angled Connector Part No. 404-51012-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 12, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51016-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 16, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51020-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 20, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51026-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 26, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51032-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 32, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51040-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 40, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51050-51
90° angled, Contact overlap: 1.5 mm, Quantity: 50, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51068-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 68, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51080-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 80, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
Angled terminal block
One27 Angled Blade Holder Part No. 403-51016-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 16, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51020-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 20, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51026-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 26, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51032-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 32, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51040-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 40, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51050-51
90° angled , Contact overlap: 1.5 mm, Quantity: 50, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51068-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 68, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51080-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 80, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51012-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 12, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
IDC connector
One27 IDC Connector Part No. 404-59012-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59016-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59020-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59026-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59032-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59040-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59050-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59068-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59080-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 PVC Standard Cable Assembly
One27 Cable Assembly, 12-Pin, 100 mm, Version 120 Part No. 404-6112-100-120-1
12 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 16-Pin, 100 mm, Version 120 Part No. 404-6116-100-120-1
16 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 20-pin, 100 mm, Version 120 Part No. 404-6120-100-120-1
20 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 26-pin, 100 mm, Version 120 Part No. 404-6126-100-120-1
26 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 32-Pin, 100 mm, Version 120 Part No. 404-6132-100-120-1
32 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 40-pin, 100 mm, Version 120 Part No. 404-6140-100-120-1
40-pin, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 50-pin, 100 mm, Version 120 Part No. 404-6150-100-120-1
50 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 68-pin, 100 mm, Version 120 Part No. 404-6168-100-120-1
68 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 80-pin, 100 mm, Version 120 Part No. 404-6180-100-120-1
80 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Custom PVC Cable Assemblies
One27 Cable Assembly, Version 100 Part No. 404-61NN-LLL-100-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 120 Part No. 404-61NN-LLL-120-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 130 Part No. 404-61NN-LLL-130-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 400 Part No. 404-61NN-LLL-400-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 420 Part No. 404-61NN-LLL-420-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 110 Part No. 404-61NN-LLL-110-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 140 Part No. 404-61NN-LLL-140-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 440 Part No. 404-61NN-LLL-440-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 High-Temperature cable assembly
One27 halogen-free cable assembly
Other number of contacts? Other stacking heights? alternative plating? Individual assembly? Lagging contacts?
Highlights of the One27 SMT Connectors
What can ept’s One27 connectors do? What PCB connection options and connection technologies do they offer? Why are One27 connectors particularly robust and easy to work with?
This animated video provides clear answers to these and many other questions. Check it out right here! (or on YouTube)!
This animated video provides clear answers to these and many other questions. Check it out right here! (or on YouTube)!
Features of the 1.27 mm SMT connectors for board-to-board applications
The One27® series offers highly flexible yet reliable connectors for a wide range of board-to-board applications. The product family is based on a 1.27 mm pitch, offers various straight and angled configurations as well as connections with ribbon cables, and is available in different pin counts ranging from 12 to 80 contacts. The connectors are pin-compatible with existing products of this type and deliver optimal results in testing.
Details at a Glance
for proper connection of blade connectors and spring-Female
to compensate for center and angular misalignment during mating
secure connection to the circuit board
Optimal processing thanks to precise placement
Reliable soldering during processing
High stability and load-bearing capacity of the solder joint
Details at a Glance
for secure and reliable connections
Reliable contact through contact closure on a rolled, smooth surface
High reliability through high-tolerance compensation
We manufacture custom-fit, custom connectors tailored to your application.
sales@eptusa.coma custom connector
now
- Other pin counts
- Different stack heights
- Alternative contact coatings
sales@eptusa.coma custom connector
now
Flexible board-to-board spacing
With One27 connectors from ept, PCB spacing ranging from 8.00 to 20.00 mm can be achieved.
The high mis-insertion protection of the One27 connectors allows the male and female headers to be inserted variably within a range of 1.5 mm. By combining the different profile heights, both small and larger PCB spacing can be achieved.
The high mis-insertion protection of the One27 connectors allows the male and female headers to be inserted variably within a range of 1.5 mm. By combining the different profile heights, both small and larger PCB spacing can be achieved.
Center Misalignment in One27 Connectors
Permissible Misalignment Tolerances
One27 SMT connectors tolerate a misalignment of 0.7 mm in both the longitudinal and transverse axes during mating.
Permissible Misalignment Tolerances
One27 SMT connectors tolerate a misalignment of 0.7 mm in both the longitudinal and transverse axes during mating.
Angular Misalignment in One27 Connectors
Permissible Angular Tilt Tolerances
When mating One27 PCB connectors, the female connector can be inserted into the male connector at an angle of up to 4° along the longitudinal axis and 2° along the transverse axis.
Permissible Angular Tilt Tolerances
When mating One27 PCB connectors, the female connector can be inserted into the male connector at an angle of up to 4° along the longitudinal axis and 2° along the transverse axis.
Test reports are available regarding compatibility with other connectors on the market.
Tape-and-reel packaging for automated assembly
IDC connector strip also available without a ribbon cable for custom cable lengths
One27 SMT PCB connectors with a 1.27 mm pitch
"Offering the widest possible variety of connection types and connector variants within a single connector product family—all while maintaining a small pitch and maximum ruggedness? We wanted to rise to this challenge!
Our One27 SMT PCB connectors with a 1.27 mm pitch now do exactly that—and much more: They are ideally suited for a wide range of mezzanine, board-to-board, and board-to-cable applications in SMT, are extremely robust and easy to process, and are also verifiably compatible with SMT connectors with a 1.27 mm pitch already on the market. With a choice of three different designs—each featuring either a male or female connector—and high anti-misalignment protection, virtually any PCB spacing from 8 to 20.00 mm and any PCB configuration can be accommodated. In addition, we offer the One27 IDC female connector not only as a standalone product but also with custom-designed cable assemblies. There really is something for every need! Optimal processability of the SMT PCB connectors is ensured by a coplanarity tolerance of just 0.1 mm and an impressive tolerance range of ±0.7 mm or ±4° longitudinally and ±2° transversely. Order your free samples today and experience the One27 connectors firsthand."
Dominik Dotzer, Product Manager, ept GmbH
Our One27 SMT PCB connectors with a 1.27 mm pitch now do exactly that—and much more: They are ideally suited for a wide range of mezzanine, board-to-board, and board-to-cable applications in SMT, are extremely robust and easy to process, and are also verifiably compatible with SMT connectors with a 1.27 mm pitch already on the market. With a choice of three different designs—each featuring either a male or female connector—and high anti-misalignment protection, virtually any PCB spacing from 8 to 20.00 mm and any PCB configuration can be accommodated. In addition, we offer the One27 IDC female connector not only as a standalone product but also with custom-designed cable assemblies. There really is something for every need! Optimal processability of the SMT PCB connectors is ensured by a coplanarity tolerance of just 0.1 mm and an impressive tolerance range of ±0.7 mm or ±4° longitudinally and ±2° transversely. Order your free samples today and experience the One27 connectors firsthand."
Dominik Dotzer, Product Manager, ept GmbH
FAQ: Questions and Answers About One27 SMT PCB Connectors
How can One27 SMT PCB connector be processed?In what ways can printed circuit boards be connected to each other using One27 SMT-Steckverbindern?What PCB spacing options are available with the One27 connectors?Why is the contact between the blade and spring-loaded connector (Female) particularly reliable in One27 connectors?Are One27 SMT-Leiterplatten-connector from ept compatible with other connectors on the market?For which applications are One27 PCB connector used?What types of currents can be transmitted using One27 connectors?What misalignment do One27 PCB connector tolerate during mating?Is the One27 IDC Female also available without a ribbon cable?Does ept also offer the One27 IDC-Female pre-assembled with cable assembly?Are the One27 SMT connector also available in tape-and-reel packaging?Are One27 PCB connector UL-recognized components?Are the ept PCB connector RoHS-compliant?
How can One27 SMT PCB connector be processed?
The One27 connector system is processed using Surface Mount Technology (SMT) and is therefore soldered directly onto printed circuit boards. The connector are typically shipped in tape and reel packaging, which enables fully automated pick-and-place processing. locating peg on the underside of the One27 connectors ensure precise positioning on the printed circuit board. ept also guarantees a maximum coplanarity of 0.1 mm for the contacts to ensure reliable soldering during processing.
In what ways can printed circuit boards be connected to each other using One27 SMT-Steckverbindern?
The various types within the One27-connector family allow for the connection of printed circuit boards in parallel, horizontal, or right-angle configurations, as well as the connection of ribbon cables to the printed circuit board.
What PCB spacing options are available with the One27 connectors?
With the One27 PCB connectors, a minimum PCB spacing of 8.00 mm and a maximum PCB spacing of 20.00 mm can be achieved. This is made possible, on the one hand, by the large overlap area of 1.5 mm. Blade and spring-loaded connectors (Female) can thus be pulled apart by up to 1.5 mm while still ensuring optimal and reliable contact. Additionally, the One27 low-, mid-, and high-profile variants can be combined in nine different configurations to create various board-to-board distances.
Why is the contact between the blade and spring-loaded connector (Female) particularly reliable in One27 connectors?
In One27 connectors, contact is established via a double-pronged female contact (female contact) that encloses the contact pin (contact pin) of the blade strip (Male). This ensures reliable contact on at least one side of the contact pin, even if the connectors are misaligned. Furthermore, contact is made via the smooth, rolled surface of the female contact. This prevents wear on the contact surface and the formation of chips when inserting One27 connectors.
Are One27 SMT-Leiterplatten-connector from ept compatible with other connectors on the market?
The One27 connector system is fully compatible with connectors from other manufacturers. The compatibility of One27-connector is confirmed in test reports, which you can request at sales@eptusa.com.
For which applications are One27 PCB connector used?
One27 SMT connectors are suitable for all applications where PCBs need to be connected robustly while taking up minimal space. Thanks to the various available orientations, heights, and termination technologies of the One27 connector, you remain completely flexible in the arrangement of the PCBs to be connected as well as in the type of connection. Whether stacked in parallel at different distances, arranged horizontally side by side, at right angles, or via ribbon cable—how you connect the PCBs is entirely up to you.
What types of currents can be transmitted using One27 connectors?
A 50-pin One27 connector transmits up to 1.4 A at an ambient temperature of 20° C. For detailed specifications, please request our test reports at sales@eptusa.com.
What misalignment do One27 PCB connector tolerate during mating?
The One27 connector feature a high misalignment tolerance. For example, when mating blade and Female connectors, a radial misalignment of 0.7 mm is permitted in both the longitudinal and transverse axes. The angular misalignment tolerance is 4° longitudinally and 2° transversely.
Is the One27 IDC Female also available without a ribbon cable?
Yes, ept offers the IDC Female from the One27 product family without cables. This allows you to assemble the cables yourself and choose the cable length to suit your needs. Please refer to the assembly instructions.
However, ept also offers custom cable assembly of the One27 IDC Female, tailored to your specific requirements.
Does ept also offer the One27 IDC-Female pre-assembled with cable assembly?
Yes, ept offers the One27 IDC Female in insulation displacement connection (IDC) with cable assembly. You can freely choose the orientation of the connector, their number of positions, and the cable length. You also have the choice between three different cable types.
Are the One27 SMT connector also available in tape-and-reel packaging?
Yes, One27 SMT connector are typically shipped in tape and reel packaging, which enables fully automated processing via pick-and-place. You are also welcome to inquire about other packaging options with us. The One27 IDC Female is generally shipped in tray packaging.
Are One27 PCB connector UL-recognized components?
Yes, One27 connector from ept are UL-recognized components in the U.S. and Canada.
Are the ept PCB connector RoHS-compliant?
RoHS (Restriction of the Use of Certain Hazardous Substances) is the directive restricting the use of certain hazardous substances in electrical and electronic equipment.
We confirm that One27 connector from ept are compliant with RoHS Directive 2011/65/EU, as per the RoHS certificate. For more information, see RoHS & REACH.
Testimonials
We respect our clients’ desire for discretion and therefore do not cite any sources below.
However, we unconditionally guarantee the authenticity of these statements.
However, we unconditionally guarantee the authenticity of these statements.
The short lead times for the One27-PCB connector were the deciding factor for us in sourcing the required connectors with a 1.27 mm pitch from ept.
For the One27 connectors, we can retain the existing PCB layout. This allows us to switch to ept’s SMT-connector very easily and without any design changes.
Thanks to the offset of the connectors on ept’s angled One27 headers, we don’t need a second camera to ensure the quality of the solder joints.
Thanks to ept, we can now also purchase the IDC Female in a 1.27 mm pitch as a loose component—that is, without cable assembly.
The soldering test for ept’s One27 SMT connectors convinced me of their excellent workability. I had never looked at connector this way during the selection process before!
I had never before seen direct evidence of how well connectors can be soldered onto a printed circuit board. The soldering test for the One27 PCB connector opened my eyes: here, you can actually see how secure the solder connection between the contacts and the printed circuit board is.
It was very helpful for us to be able to purchase IDC female headers with a 1.27 mm pitch and such a wide range of contact counts individually.
We would love to visit your beautiful location, but from a quality perspective, we see no reason to do so