Compact and robust PCB connections in SMT
With One27 connectors from ept, PCB spacing of 8.00 to 20.00 mm can be achieved.
Features
- 12 to 80 contacts, 1
- 4 A current-carrying capacity,
- 500 mating cycles,
- maximum contact reliability,
- tested compatibility with other manufacturers,
- IDC header strips available individually or
- pre-assembled with cable, packaged in tape & reel,
- LV214 tested
Applications
- Board-to-board (mezzanine) from 8 mm to 20.00 mm
- Parallel and right-angle connections
- IDC connection with ribbon cable
One27: Overview
Filter
Straight spring strip
One27 High-Profile Connector Part No. 404-54012-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54016-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54020-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54026-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54032-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54040-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54050-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54068-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Connector Part No. 404-54080-51
Can be combined for PCB spacing of 15.4–20.0 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53032-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52012-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52016-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52020-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52026-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52032-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52040-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52050-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52068-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Connector Part No. 414-52080-51
Can be combined for PCB spacing of 8.0–12.6 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53012-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53016-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53020-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53026-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53040-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53050-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53068-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Mid-Profile Connector Part No. 414-53080-51
Can be combined for PCB spacing of 10.8–15.4 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
Straight blade bar
One27 High-Profile Blade Holder Part No. 403-54012-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54016-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54020-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54026-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54032-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54040-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54050-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54068-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 High-Profile Blade Holder Part No. 403-54080-51
Can be combined for PCB spacing of 11.1–20.0 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unassembled): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52012-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52016-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52020-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52026-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52032-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52040-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52050-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52068-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Low-Profile Blade Holder Part No. 413-52080-51
Can be combined for PCB spacing of 8.0–16.9 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53012-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53016-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53020-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53026-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53032-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53040-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53050-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53068-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Mid-Profile Knife Strip Part No. 413-53080-51
Can be combined for PCB spacing of 9.5–18.4 mm, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, SMT Connectivity, Height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
Angled spring strip
One27 Angled Connector Part No. 404-51012-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 12, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51016-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 16, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51020-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 20, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51026-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 26, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51032-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 32, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51040-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 40, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51050-51
90° angled, Contact overlap: 1.5 mm, Quantity: 50, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51068-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 68, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Connector Part No. 404-51080-51
90° angled, Contact overlap: 1.5 mm, Number of poles: 80, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
Angled terminal block
One27 Angled Blade Holder Part No. 403-51016-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 16, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51020-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 20, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51026-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 26, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51032-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 32, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51040-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 40, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51050-51
90° angled , Contact overlap: 1.5 mm, Quantity: 50, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51068-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 68, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51080-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 80, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Angled Blade Holder Part No. 403-51012-51
90° angled , Contact overlap: 1.5 mm, Number of poles: 12, SMT Connectivity, Grid: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
IDC connector
One27 IDC Connector Part No. 404-59012-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pole count 12 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59016-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pitch 16 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59020-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pole count 20 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59026-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pitch 26 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59032-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, 32 teeth in a 1.27 mm pitch, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59040-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, 40 poles in a 1.27 mm pitch, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59050-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, 50 pins in a 1.27 mm pitch, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59068-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, Pole count 68 in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Connector Part No. 404-59080-61
for IDC connection with AWG 30/7 ribbon cable, Contact overlap: 1.5 mm, 80 poles in a 1.27 mm grid, 0.635 mm ribbon cable, Performance Level 1, The IDC connector is intended for use in cable assembly. Please follow the installation instructions.
Cable-to-Board
High Density
Rugged
One27 PVC Standard Cable Assembly
One27 Cable Assembly, 12-Pin, 100 mm, Version 120 Part No. 404-6112-100-120-1
12 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 16-Pin, 100 mm, Version 120 Part No. 404-6116-100-120-1
16 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 20-pin, 100 mm, Version 120 Part No. 404-6120-100-120-1
20 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 26-pin, 100 mm, Version 120 Part No. 404-6126-100-120-1
26 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 32-Pin, 100 mm, Version 120 Part No. 404-6132-100-120-1
32 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 40-pin, 100 mm, Version 120 Part No. 404-6140-100-120-1
40-pin, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 50-pin, 100 mm, Version 120 Part No. 404-6150-100-120-1
50 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 68-pin, 100 mm, Version 120 Part No. 404-6168-100-120-1
68 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, 80-pin, 100 mm, Version 120 Part No. 404-6180-100-120-1
80 pins, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, 100 mm long, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Custom PVC Cable Assemblies
One27 Cable Assembly, Version 100 Part No. 404-61NN-LLL-100-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 120 Part No. 404-61NN-LLL-120-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 130 Part No. 404-61NN-LLL-130-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 400 Part No. 404-61NN-LLL-400-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 420 Part No. 404-61NN-LLL-420-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 110 Part No. 404-61NN-LLL-110-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 140 Part No. 404-61NN-LLL-140-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 440 Part No. 404-61NN-LLL-440-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 High-Temperature Cable Assembly
One27 Cable Assembly, Version 100 Part No. 404-62NN-LLL-100-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 120 Part No. 404-62NN-LLL-120-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 130 Part No. 404-62NN-LLL-130-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 400 Part No. 404-62NN-LLL-400-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 420 Part No. 404-62NN-LLL-420-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 110 Part No. 404-62NN-LLL-110-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 140 Part No. 404-62NN-LLL-140-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 440 Part No. 404-62NN-LLL-440-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30/7 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Halogen-Free Cable Assemblies
One27 Cable Assembly, Version 100 Part No. 404-66NN-LLL-100-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 120 Part No. 404-66NN-LLL-120-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 130 Part No. 404-66NN-LLL-130-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 400 Part No. 404-66NN-LLL-400-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 420 Part No. 404-66NN-LLL-420-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 110 Part No. 404-66NN-LLL-110-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Version 140 Part No. 404-66NN-LLL-140-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 Cable Assembly, Model 440 Part No. 404-66NN-LLL-440-1
Pole numbers 12 through 80, Contact overlap: 1.5 mm, AWG 30 ribbon cable, 0.635 mm, with customizable lengths from 30 to 999 mm, Assembly using the cut-and-crimp technique (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
Other number of contacts? Other stacking heights? alternative plating? Individual assembly? Lagging contacts?
Highlights of the One27 SMT Connectors
What can ept’s One27 connectors do? What PCB connection options and connection technologies do they offer? Why are One27 connectors particularly robust and easy to work with? This animated video provides
clear answers to these and many other questions. Check it out right here! (or on YouTube)!
clear answers to these and many other questions. Check it out right here! (or on YouTube)!
Features of the 1.27 mm SMT connectors for board-to-board applications
The One27® series offers highly flexible yet reliable connectors for a wide range of board-to-board applications. The product family is based on a 1.27 mm pitch, offers various straight and angled configurations as well as connections with ribbon cables, and is available in different pin counts ranging from 12 to 80 contacts. The connectors are pin-compatible with existing products of this type and deliver optimal results in testing.
Details at a Glance
to ensure proper connection between the blade and the terminal strip
to compensate for axial and angular misalignment during assembly
secure connection to the circuit board
Optimal processing thanks to precise placement
Reliable soldering during processing
high strength and durability of the solder joint
Details at a Glance
for secure and reliable connections
Reliable contact through contact closure on a rolled, smooth surface
High reliability due to high tolerance compensation
We manufacture custom-fit, custom connectors tailored to your application.
Request a custom connector now
sales@eptusa.com
- Other pin counts
- Other stack heights
- Alternative contact coatings
Request a custom connector now
sales@eptusa.com
Flexible board-to-board spacing
With One27 connectors from ept, PCB spacing ranging from 8.00 to 20.00 mm can be achieved.
The high mis-insertion protection of the One27 connectors allows the male and female headers to be inserted variably within a range of 1.5 mm. By combining the different mounting heights, both small and larger PCB spacing can thus be achieved.
The high mis-insertion protection of the One27 connectors allows the male and female headers to be inserted variably within a range of 1.5 mm. By combining the different mounting heights, both small and larger PCB spacing can thus be achieved.
Center Misalignment in One27 Connectors
Permissible Misalignment Tolerances
One27 SMT connectors tolerate a misalignment of 0.7 mm in both the longitudinal and transverse axes during mating.
Permissible Misalignment Tolerances
One27 SMT connectors tolerate a misalignment of 0.7 mm in both the longitudinal and transverse axes during mating.
Angular Misalignment in One27 Connectors
Permissible Angular Tilt Tolerances
When mating One27 PCB connectors, the female connector can be inserted into the male connector at an angle of up to 4° along the longitudinal axis and 2° along the transverse axis.
Permissible Angular Tilt Tolerances
When mating One27 PCB connectors, the female connector can be inserted into the male connector at an angle of up to 4° along the longitudinal axis and 2° along the transverse axis.
Test reports are available regarding compatibility with other connectors on the market.
Tape-and-reel packaging for automated assembly
IDC connector strip also available without a ribbon cable for custom cable lengths
One27 SMT PCB connectors with a 1.27 mm pitch
"Offering the widest possible range of connection types and connector variants within a single connector product family—all while maintaining a small pitch and maximum ruggedness? We wanted to rise to this challenge!
Our One27 SMT PCB connectors with a 1.27 mm pitch now deliver exactly that—and much more: they are ideally suited for a wide range of mezzanine, board-to-board, and board-to-cable applications in SMT, while being extremely robust and easy to process, and moreover verifiably compatible with existing 1.27 mm pitch SMT connectors already on the market. With a selection of three different designs for both male and female connectors, as well as high anti-misinsertion protection, virtually any PCB pitch from 8 to 20.00 mm and any PCB layout can be realized. Additionally, we offer the One27 IDC female connector not only individually but also with a customizable cable assembly. There really is something for every need! Optimal processability is ensured by a coplanarity tolerance of just 0.1 mm and an impressive tolerance range of ±0.7 mm or ±4° longitudinally and ±2° transversely. Order free samples to evaluate the One27 connectors today."
Dominik Dotzer, Product Manager, ept GmbH
Our One27 SMT PCB connectors with a 1.27 mm pitch now deliver exactly that—and much more: they are ideally suited for a wide range of mezzanine, board-to-board, and board-to-cable applications in SMT, while being extremely robust and easy to process, and moreover verifiably compatible with existing 1.27 mm pitch SMT connectors already on the market. With a selection of three different designs for both male and female connectors, as well as high anti-misinsertion protection, virtually any PCB pitch from 8 to 20.00 mm and any PCB layout can be realized. Additionally, we offer the One27 IDC female connector not only individually but also with a customizable cable assembly. There really is something for every need! Optimal processability is ensured by a coplanarity tolerance of just 0.1 mm and an impressive tolerance range of ±0.7 mm or ±4° longitudinally and ±2° transversely. Order free samples to evaluate the One27 connectors today."
Dominik Dotzer, Product Manager, ept GmbH
FAQ: Questions and Answers About One27 SMT PCB Connectors
How can One27 SMT PCB connectors be assembled?In what ways can printed circuit boards be connected to each other using One27 SMT connectors?What PCB spacing options are available with the One27 connectors?Why is the contact between the blade and the spring strip particularly reliable in One27 connectors?Are ept's One27 SMT PCB connectors compatible with other connectors on the market?In which applications are One27 PCB connectors used?What types of currents can be transmitted using One27 connectors?What degree of misalignment do One27 PCB connectors tolerate during mating?Is the One27 IDC connector available without a ribbon cable?Does ept also offer the One27 IDC connector pre-assembled with a cable?Are the One27 SMT connectors also available in tape-and-reel packaging?Are One27 PCB connectors UL-recognized components?Are ept PCB connectors RoHS-compliant?
How can One27 SMT PCB connectors be assembled?
The One27 connector system is manufactured using surface mount technology (SMT) and is therefore soldered directly onto printed circuit boards. The connectors are typically supplied in tape-and-reel packaging, which enables fully automated pick-and-place assembly. Positioning pins on the underside of the One27 connectors ensure precise positioning on the printed circuit board. ept also guarantees a maximum contact coplanarity of 0.1 mm to ensure reliable soldering during processing.
In what ways can printed circuit boards be connected to each other using One27 SMT connectors?
The various configurations of the One27 connector family allow for the connection of printed circuit boards (PCBs) in parallel, horizontal, or right-angle arrangements, as well as the connection of ribbon cables to the PCB.
What PCB spacing options are available with the One27 connectors?
With One27 PCB connectors, a minimum PCB spacing of 8.00 mm and a maximum PCB spacing of 20.00 mm can be achieved. This is made possible, on the one hand, by the large 1.5 mm over-insertion range. The male and female connectors can thus be separated by up to 1.5 mm while still ensuring optimal and reliable contact. Additionally, the One27 low-, mid-, and high-profile heights can be combined in nine variations to create different PCB spacings.
Why is the contact between the blade and the spring strip particularly reliable in One27 connectors?
In One27 connectors, electrical contact is established via a double-lobed spring contact that encloses the contact pin of the blade strip. This ensures reliable contact on at least one side of the contact pin, even if the connectors are misaligned. Furthermore, contact is made via the smooth, rolled surface of the spring contact. This prevents wear on the contact surface and chip formation when inserting One27 connectors.
Are ept's One27 SMT PCB connectors compatible with other connectors on the market?
The One27 connector system is fully compatible with connectors from other manufacturers. The compatibility of One27 connectors is confirmed in test reports, which you can request at sales@eptusa.com.
In which applications are One27 PCB connectors used?
One27 SMT connectors are suitable for all applications where PCBs need to be connected securely while taking up minimal space. With a range of orientations, heights, and connection technologies, One27 connectors provide full flexibility for arranging the PCBs and selecting the interconnect method. Whether stacked in parallel at various distances, mounted horizontally side by side, oriented at right angles, or linked via ribbon cable, the choice of configuration remains entirely yours.
What types of currents can be transmitted using One27 connectors?
A 50-pin One27 connector can handle up to 1.4 A at an ambient temperature of 20°C. For detailed specifications, please request our test reports at sales@eptusa.com.
What degree of misalignment do One27 PCB connectors tolerate during mating?
One27 connectors feature a high misalignment tolerance. When mating male and female connectors, a center misalignment of 0.7 mm is permitted in both the longitudinal and transverse axes. The angular misalignment tolerance is 4° in the longitudinal direction and 2° in the transverse direction.
Is the One27 IDC connector available without a ribbon cable?
Yes, ept supplies the IDC connector from the One27 product family without cables. This option enables you to assemble the cables in-house and select the exact cable length required for your application. Please refer to the installation instructions for guidance. However,
ept also provides custom cable assembly for the One27 IDC connector, tailored to your specific requirements.
Does ept also offer the One27 IDC connector pre-assembled with a cable?
Yes, ept offers the One27 IDC connector strip with insulation displacement terminals and pre-assembled cables. You can freely choose the orientation of the connectors, the number of pins, and the cable length. You also have the option to choose from three different cable types.
Are the One27 SMT connectors also available in tape-and-reel packaging?
Yes, One27 SMT connectors are typically supplied in tape-and-reel packaging, which enables fully automated pick-and-place processing. You are also welcome to inquire about other packaging options. The One27 IDC header is generally supplied in tray packaging.
Are One27 PCB connectors UL-recognized components?
Yes, One27 connectors from ept are UL-recognized components in the United States and Canada.
Are ept PCB connectors RoHS-compliant?
RoHS (Restriction of the Use of Certain Hazardous Substances) is the directive restricting the use of certain hazardous substances in electrical and electronic equipment.
We confirm that One27 connectors from ept are compliant with RoHS Directive 2011/65/EU, as evidenced by the RoHS certificate. For more information, please visit RoHS & REACH.
Testimonials
We respect our clients’ desire for discretion and therefore do not cite any sources below.
However, we unconditionally guarantee the authenticity of these statements.
However, we unconditionally guarantee the authenticity of these statements.
The short lead times for One27 PCB connectors were the deciding factor in our decision to purchase the required 1.27 mm pitch connectors from ept.
With the One27 connectors, we can retain the existing PCB layout. This means we can easily transition to ept’s SMT connectors without any design modifications.
Thanks to the offset connectors on ept's angled One27 strips, we do not require a second camera to verify the quality of the soldering.
Thanks to ept, we can now purchase the IDC connector strip with a 1.27 mm pitch as a loose unit, i.e., without pre-assembled cables.
The soldering test for ept's One27 SMT connectors demonstrated their excellent processability. This perspective on connector evaluation was new to me during the selection process.
I had never before seen direct proof of how well connectors can be soldered onto a circuit board. The soldering test for the One27 PCB connectors provided clear evidence: it demonstrates the security of the solder joint between the contacts and the circuit board.
It was very helpful for us to be able to purchase IDC connector strips with a 1.27 mm pitch and such a wide range of contact counts individually.
We would love to visit your beautiful location, but from a quality perspective, we see no reason to do so