backDescriptionTechnical SpecificationsHole SpecificationsMatching ProductsAccessoriesModificationsProcessingPackagingDownloadsStock Check
Velox center Part No. 308-50100-41
![Velox Center photo](https://www.eptusa.com/data/media/98/Velox_Center_Foto-28107.jpg)
Illustration similar
Perpendicular
Press-fit
High Speed
Rugged
![Velox Center assembly design 308-50100-4x](https://www.eptusa.com/data/media/98/Velox_Center_Bestueckplan_308-50100-4x-15888.png)
![Logo VPX](https://www.eptusa.com/data/media/96/VPX_Logo-15042.png)
- plating Press-fit Zone: SnPb
- fully loaded (144 contacts)
- termination technology: Press-fit
- pitch 1.8 mm
- data transfer rate 10 Gbit/s
Technical Specifications
Basics
Specification | VITA 46 |
---|---|
No. of Contacts | 144 |
Termination Technology | Press-fit |
Termination Length | 1.62 mm |
Operating Temperature Range | -55°C to +105°C |
Material
Insulator Material | LCP, UL 94 V-0 |
---|---|
CTI value IEC 60112 | 175 |
Contact Material | Phosphor Bronze |
Plating | 1.27 µm Au over Ni on contact area, SnPb on Press-fit zone |
Mechanical
Pitch | 1.8 mm |
---|---|
Mating Force per Pin | max. 0.75 N |
Separating Force per Pin | min. 0.15 N |
Durability | 200 mating cycles |
Electrical
Operational Current | 1.0 A (<30°C) |
---|---|
Operational Voltage | 50 VAC Peak or DC |
Contact Resistance | max. 80 mΩ |
Clearance and Creepage | ≥ 0.7 mm |
Insulation Resistance | min. 1000 MΩ |
Test Voltage | 500 V (AC/DC) |
Data Transfer Rate | 10 Gbit/s |
Approval / Compliance
UL file | E130314 |
---|
Hole Specifications
![lochspezifikationen bemassungen](https://www.eptusa.com/data/media/78/lochspezifikationen-bemassungen-9351.png)
Material | imm. Sn printed circuit boards |
---|---|
Nominal Hole | Ø 0.56 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 0.56 ±0.05 mm |
C Drill Hole | 0.65 ±0.02 mm |
D Cu Plating | min. 25 µm |
E Surface | imm. Sn plating, max. 1.5 µm |
F Annular Ring | min. 0.1 mm |
Material | Ni, Au printed circuit boards |
---|---|
Nominal Hole | Ø 0.56 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 0.56 ±0.05 mm |
C Drill Hole | 0.65 ±0.02 mm |
D Cu Plating | min. 25 µm |
E Surface | Ni, Au plating, 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni |
F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5
Matching Products
![Velox Center photo](https://www.eptusa.com/data/media/98/Velox_Center_Foto-28107.jpg)
Velox center
Part Number 308-50100-42
Accessories
Modifications
Available on request
- different custom loaded versions
Processing
Packaging
Tray
20 pcs / Tray
10 Tray / Box