We’re sorry but no results were found. Maybe you’ll find this interesting though:
Zero8 - 0.8 mm SMT - Grid: 0.8 mm
- 16 Gbps
- Board-to-board from 6 to 21 mm
- Parallel & right-angled
- Shielded & unshielded
Colibri® - 0.5 mm SMT - Grid: 0.5 mm
- 25+ Gbps
- Board-to-board 5 & 8 mm
- COM Express®
- CoreExpress®
One27 - 1.27 mm SMT - Pitch: 1.27 mm
- Board-to-board from 8 to 20 mm
- Parallel & right-angle
- Available with cable
EC.8 - 0.8 mm SMT Edge Card - Grid: 0.8 mm
- 28 Gbps
- Direct connector
- 1.60 mm daughter card thickness
- 20 to 200 contacts
DIN 41612 connector / IEC 60603-2 connector The ept DIN 41612 / IEC 60603-2 connector series includes 12 basic designs of PCB connectors, as well as additional versions with 2.54 mm or 5.08 mm pitch.
The selection includes both signal connectors with a current-carrying capacity of up to 1.5 A per pin and power connectors with up to 5.6 A or even 15 A per pin.
flexilink - 2.54 mm press-fit technology - 2.54 mm pitch
- Insertion zone Tcom press®
- Parallel and horizontal
- Only 1 component
- Jumper & board-to-board variant
VarPol Pin & Socket Strips VarPol connectors offer users a wide range of connector
solutions for use on printed circuit boards.
PC/104, PC/104-Plus - 2.54 mm pitch
- Board-to-board 15.24 & 22 mm
- Modification of pin count
- PC104-Plus with 120 pins
MicroTCA - PICMG-compliant
- Press-fit zone Tcom press®
- up to 12 amps
- 72 signal pins
- 24 power pins
hm2.0 Hard Metric - 2 mm grid
- Insertion zone Tcom press®
- IEC 61076-4-101
- 5 or 8 signal rows
- 12 pin lengths
Velox - High-Speed Backplane Velox® is a modular connector system for high-speed backplane applications.
Power Terminals - Grid 5.08 x 10.16 mm
- Pitch 5.08 x 7.62 mm
- Press-fit technology
- Angled or cranked
- M4 or M5 thread
Float27 - 1.27 mm SMT - Pitch: 1.27 mm
- Board-to-board from 8 to 20 mm
- Parallel & right-angle
- Available with cable
