Mail
SearchbackDescriptionTechnical SpecificationsHole SpecificationsMatching ProductsPackagingDownloadsStock Check
Power Terminals Washer Part No. 910-20320
Technical Specifications
Basics
| Operating Temperature Range | -55°C to +125°C |
|---|
Material
| Contact Material | Copper alloy |
|---|
Processing
| Thread | M4 |
|---|
Approval / Compliance
| Environment | RoHS compliant |
|---|
Hole Specifications
| Material | imm. Sn printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 2.9 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | imm. Sn plating, max. 1.5 µm |
| F Annular Ring | min. 0.1 mm |
| Material | Ni, Au printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 2.9 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | Ni, Au plating, 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni |
| F Annular Ring | min. 0.1 mm |
| Material | HAL Sn printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 2.9 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | HAL Sn, 5 - 15 µm |
| F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5
Matching Products
Power Terminals Washer
Part Number 910-20330
Packaging
Bulk