DIN 41612 Male 90°, type H7/F24 Part No. 117-40164

H7F24 ML 2

Illustration similar

Perpendicular
Through Hole
Power
Rugged
DIN H7F24 ML AnschlusslaengeDIN H7F24 ML Belegung
  • Termination length 3.1 mm
  • 7 + 24 contacts
  • premating contact at pos. Z32
  • solder
  • performance level 2
Drawings
Further Information
Delivery time

Technical Specifications

Basics

SpecificationIEC 60603-2 (DIN 41612)
Performance Level2
No. of Contacts7 + 24
Termination Technologysolder
Termination Length3 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialPBT glass filled UL 94 V-0
CTI value
IEC 60112		200
Contact MaterialCopper alloy

Mechanical

Pitch5.08 x 3.81 mm
Separating Force per Pin> 0.2 N
Durability400  mating cycles

Electrical

Operational Current15 A, 5.6 A
Contact Resistance<8 mΩ, <15 mΩ
Insulation Resistance>106 MΩ

Processing

Soldering Temperatureto 260°C

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant

Derating Diagram

Options

Board Lock 90°

Suitable for connectors with type B, C, D, E, F, G male connectors and R female connectors
DIN Board Lock ML ZeichnungDIN Board Lock ML Foto
Type of InsertionForcesPCB ThicknessPart Number
Fmnot soldered Fhsoldered Fh 117-40164C1
Locked< 30 N> 10 N> 20 N≤ 1.6 mm
Under Tension< 30 N> 7.5 N> 20 N> 1.6 mm

PackagingDownloadsStock Check

Packaging

Box
20 pcs / Box
10 Box / Box




Downloads

Drawings
Further Information

Stock Check

You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
    Your message has been sent.

    Thank you for your interest - we will process your request as soon as possible.

    Contact form

    Fields with * are mandatory fields.

    Personal data

    Call back

    Message

    I'm interested in

    Privacy Policy

    Thank you very much!

    We will contact you shortly to discuss your requirements. We will prepare and send you the detailed report on the HighSpeed properties and S-parameters to simulate your own design.

    Request HighSpeed properties + S-Parameters to simulate your own design

    Fields marked with * are mandatory.

    Thank you for your inquiry

    We will check your requirements and get back to you as soon as possible.

    Request connector customization

    Fields marked with * are mandatory, please fill in.

    Contact person

    Your request

    FORM_UPLOADFORMATERR_JPGPDF

    Thank you for your inquiry

    We will check your requirements and get back to you as soon as possible.

    Your requirement for the required connector

    Fields marked with * are mandatory, please fill in.

    Contact person

    Your request

    FORM_UPLOADFORMATERR_JPGPDF

    Connectors ept productsDIN 41612 / IEC 60603-2