- back
- Description
- Technical Specifications
- Derating Diagram
- Hole Specifications
- Accessories
- Modifications
- Processing
- Packaging
- Downloads
- Stock Check
DIN 41612 Male 90°, type B/2 Part No. 101-69014
Illustration similar
Perpendicular
Horizontal
Press-fit
Rugged
- Termination length 3.4 mm
- 32 contacts
- Press-fit
- performance level 2
Technical Specifications
Basics
Specification | IEC 60603-2 (DIN 41612) |
---|---|
Performance Level | 2 |
No. of Contacts | 32 |
Termination Technology | Press-fit |
Termination Length | 3.4 mm |
Operating Temperature Range | -55°C to +125°C |
Material
Insulator Material | PBT glass filled UL 94 V-0 |
---|---|
CTI value IEC 60112 | 200 |
Contact Material | Copper alloy |
Mechanical
Pitch | 2.54 mm |
---|---|
Mating Force | < 30 N |
Separating Force per Pin | > 0.15 N |
Durability | 400 mating cycles |
Electrical
Operational Current | 2.6 A |
---|---|
Contact Resistance | <20 mΩ |
Clearance and Creepage | ≥ 1.2 mm |
Insulation Resistance | >106 MΩ |
Test Voltage | 1000 V |
Approval / Compliance
UL file | E130314 |
---|---|
Environment | RoHS compliant |
Hole Specifications
Material | imm. Sn printed circuit boards |
---|---|
Nominal Hole | Ø 1.0 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 1.0 +0.09 / -0.06 mm |
C Drill Hole | 1.15 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | imm. Sn plating, max. 1.5 µm |
F Annular Ring | min. 0.1 mm |
Material | Ni, Au printed circuit boards |
---|---|
Nominal Hole | Ø 1.0 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 1.0 +0.09 / -0.06 mm |
C Drill Hole | 1.15 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | Ni, Au plating, 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni |
F Annular Ring | min. 0.1 mm |
Material | pure Cu printed circuit boards |
---|---|
Nominal Hole | Ø 1.0 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 1.0 +0.09 / -0.06 mm |
C Drill Hole | 1.15 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | OSP, z.B. GLICOAT-SMD (F2) with 0.12 - 0.15 µm |
F Annular Ring | min. 0.1 mm |
Material | HAL Sn printed circuit boards |
---|---|
Nominal Hole | Ø 1.0 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 1.0 +0.09 / -0.06 mm |
C Drill Hole | 1.15 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | HAL Sn, 5 - 15 µm |
F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5
Accessories
Modifications
Available on request
- Pre-mating and late-mating contacts
- Contact arrangement
- Performance levels I + III or customer-specific
- Special contact length
Processing
Packaging
Tray
54 pcs / Tray
10 Tray / Box